Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's discreet, doesn't use keys or LEDs and is hidden within the wiring of the vehicle.
It also allows the user to turn off the system temporarily through Transport Mode for when they are renting their vehicle. This guide will walk you through the installation of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key cloning attacks, hacking attacks and relay attacks. The system connects directly to your vehicle's ECU and is secured by a unique PIN code of your choice. It is inaccessible to thieves using scanners for diagnostics or other modern methods, and is unable to be disabled by circuit cuts.
The system is easy to use, but it is essential to have a an expert installation to ensure a clean and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement the protection package for your vehicle.
First, the installer needs to disconnect your battery to prevent accidental airbag deployment or short circuits. After the battery has been disconnected, the installer can start working safely. Basic hand tools are helpful for securing connections with precision and a multimeter may be used to test electrical values and safety. Insulation tape and cable tie are vital to secure connections and keep wiring neat. The Ghost Immobiliser user's manual will give specific instructions that are tailored to your model.
It is essential to choose the right grounding spot that is free of paint or debris during installation. The installer must also make sure the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on your vehicle's ECU. Based on the model, these wires may require soldering or plugged in. Using a high-quality connector is recommended to ensure a durable and secure connection.
Transport Mode can be activated by the customer after the installation is completed. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The customer must press the icon for service on the dashboard five times within 2 seconds. Once this is done, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a smart option for those who regularly rents out their vehicles through platforms such as Turo. An immobiliser can reduce insurance rates, as it lowers the chance of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It will stop your car from being started even when a criminal steals or copies the key. This is due to its advanced technology that is designed to stop the car's engine from starting until the correct PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle which allows it to communicate with the ECU directly. It makes use of buttons already on the dashboard and the steering wheel to create a unique sequence only you know, making it impossible for anyone else to start your vehicle. This is the most secure way to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing a ghost immobiliser can be an easy process, however, it is crucial to follow the instructions carefully to avoid problems with the electrical system and malfunctions. You'll need to locate a 12V power supply and a solid grounding on the chassis of your car. Then, you can start connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a solid connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to prevent short circuits of electricity.
Once the wires are connected, you can connect the battery and start the engine to test the function of the immobiliser. After you've confirmed that everything is working properly and you are satisfied, you can place the immobiliser in a safe place inside the vehicle. Be sure to cover it properly to stop thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it's a top-quality deterrent to car burglars. It provides superior protection against key cloning, hacking and relay attacks. It isn't able to be disabled unless you know the code. The device is also simple to use and can be set into a service valet mode so that your automobile isn't activated if you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. Unlike other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings of your vehicle.
It's also totally undetectable by thieves using diagnostic scanning devices. This is because the system doesn't transmit and receive radio frequency signals and it relies on the CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.
Enter ghost car immobiliser for disarming (either two or one button) and then turn on the ignition of your car to use Ghost Immobiliser. The indicator will flash two times to confirm that you've entered the correct code. You are now able to begin driving your car safely.
Once installed, Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while also protecting its value. If you have to hand over your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need find an energy source that is constant (12V) and an earthing point. Make sure that both are well-insulated and safe to touch. It is also recommended to use cable ties to tie and secure the wires, since this will decrease the chance of being tampered with by thieves. To avoid making mistakes, make sure to double-check these points and mark them using labels or tape. Check all connections for signs they're getting worn out. Make sure that all connections are securely in place and properly sealed. Don't forget to test your Ghost Immobiliser after installation has been completed. This will make sure that the unit functions properly and that all connections and insulation are secure. Be sure to fix any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your car's ECU to stop unauthorised motor starting. Its innovative technology safeguards your vehicle against hacking and key cloning along with other common methods employed by thieves to steal vehicles. The Ghost also works in conjunction with other alarm and tracking systems to offer the ultimate vehicle protection. The Ghost's unique features, paired with its subtle design, make it a popular choice for drivers who love cars and security-conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it is essential to follow every step of the installation procedure. A good starting point is to refer to the wiring diagram for your vehicle that serves as a guideline for locating and connecting the required wires. The next step is to determine the power source and grounding points. Once these are found, you'll have to mark them in a way that they're easy to identify when installing. It's essential to use high-quality materials and tools. Basic hand tools can aid in making precise connections. A multimeter can verify electrical values, and also ensure security. what is a ghost immobiliser and cable tie will ensure that all connections are tidy. A Ghost-specific user's manual is also available.
Before you begin installing it is important to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser works as intended, preventing unauthorised vehicle starts. It's recommended to perform this routinely as part of your routine vehicle inspections to ensure that the system is always functioning properly.
After the installation is completed, you can start driving your vehicle with confidence. The Ghost will protect your car from potential car thieves. It will ensure that no one is able to drive away with your vehicle without having the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to detect any attempt to steal or tamper that could lead to the location of your vehicle if it's stolen.
The Ghost can be used on a variety of vehicles and is compatible with most major brands. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines for the installation of our products. This assures insurance companies, customers and law enforcement officials that installations are done in a safe and correct manner.