Autowatch Ghost Immobiliser
The renowned Ghost Immobiliser provides your vehicle with advanced protection against key-cloning as well as theft, hacking and hacking. This TASSA verified system remains undetectable to thieves and blocks them from starting your car.
This device is silent and uses buttons on your vehicles steering wheel as well as the doors and the centre console to let you create a unique, PIN sequence that can be changed up to 20 characters which must be entered prior to the car can start.
Easy to install
It is more important than ever to secure your vehicle. With car crimes increasing and cloning devices readily available, it's essential to do so. Our Autowatch Ghost immobiliser provides a secure, efficient and affordable solution to protect against key cloning and vehicle theft. It is virtually undetectable by thieves and operates via existing buttons in the steering wheel and door panels as well as the centre console. This allows customers to make an exclusive disarm sequence that is similar to that of credit cards, which have to be entered before the vehicle can start or leave. This makes the system almost impossible to spot and is also unaffected by jamming or spoofing devices as used with other systems available.
The installation of the Ghost unit is a highly-specialized procedure that should only be carried out by an authorized installer. The unit is carefully integrated into the CAN bus system of your vehicle and is able to communicate directly with the ECU. The Ghost can be installed without altering the factory settings. It is virtually impossible for thieves to bypass the system using signal boosters.
After the Ghost has been installed it is necessary to use a different and more efficient disarming sequence in order to start your vehicle. This can be done by pressing the service button on your vehicle 5 times in 2 seconds, while ensuring that it is not being pressed for an extended period of time. The system will blink twice to signal that Transport Mode has been activated. This feature is ideal for classic, sports or prestige vehicles that require their security systems to be temporarily disabled during transport or servicing.
When Transport Mode is activated, your immobiliser will be disabled and you cannot reactivate it by entering the PIN code. This feature is ideal for those who would like to store their cars during the winter months to protect theft, or to avoid paying higher insurance rates.
No LED indicators or key-fobs to give away the location of the vehicle.
The Ghost immobiliser shields your vehicle from theft by using buttons located on the dashboard or steering wheel. You can enter a pin code without being noticed prior to starting the engine. It can be connected to an app on your phone to arm and disarm remotely. It blocks signal relay, ECU swapping, and key copying. It's easy to install, and can be put in a wide variety of vehicles. It is also very stealthy and can be hidden in hard-to-reach places like behind the dashboard, or in the trim of the steering wheel.
This is a fantastic option for high-performance vehicles because it can shut off your vehicle's ignition if incorrect pin code is entered. This will stop thieves from stealing your pride and happiness. The device can also send an alert to your mobile in the event that you've left your car unattended in public, giving you peace of mind while you're away from your car.
The Ghost is different from other immobilisers in that it does not require additional fobs or LED indicators. It is also able to be concealed in a hard-to-find area of your vehicle. It is extremely indestructible to detection as it communicates directly with the CAN data network of your vehicle. It does not emit radio signals, which means it is inaccessible to RF scanners or signal jammers.
It is designed to be weatherproof and tamper-proof. It also has the ability to withstand extreme temperatures. It's also impossible to be tampered with by cutting the wires, or by removing it. Moreover, it doesn't require any circuit cutting to function, so it's undetectable to organized gangs of thieves that employ diagnostics reading devices to identify security systems that are fitted. It's also not affected by auto diagnostics equipment that is professional that examines the CAN data system for the presence of security devices.
No circuit cuts
With no LED indications or key fobs to give away its location the ghost device is hidden in your car, under the dashboard or on the steering wheel and makes use of buttons in your car to create a unique PIN code that has to be entered before the engine can be started. This means that even if the criminal does have your keys they cannot drive the vehicle away because they wouldn't be aware of the correct PIN sequence. The device also does not transmit any radio signals, which means that organised gangs of thieves using diagnostics devices will be unable to recognize the device.
This innovative immobiliser is TASSA approved and can help reduce your insurance premiums, especially for modified vehicles that have been modified by their owners. It also stops key theft and ECU switching, which means that the only way for a burglar to take your joy and happiness is to take it away. it away.
Because the system does not utilize the factory key fobs or dashboard buttons, it is an entirely silent device, it communicates with your ECU through the CAN data circuit which is completely silent and gives no indication that it's installed. This means that a thief will not be able to add new key fobs or replace the ECU in order to cause your vehicle to start. This eliminates any other methods of theft employed in recent years such as key cloning RF scanning, and code theft.
If you forget your PIN code Our engineers have provided a reset emergency for the device that lets you enter "service mode". This will allow the technician or dealer to temporarily start and drive your vehicle so that they can carry out maintenance work, MOTs or valet parking without having to enter the PIN code again. After the technician has completed their work or you have removed your vehicle, simply enter the PIN code and the device will be out of service mode dependent on speed and duration.
No radio signals
The Ghost immobiliser, unlike other car security systems is not dependent on alarm systems or key fobs to block vehicles from beginning. It communicates with the vehicle's ECU, the CAN data circuit as well as other circuits to stop the engine starting. This makes it a discrete solution that isn't affected by key cloning or radio frequency scanning techniques employed by thieves to bypass other security devices. It can be used in conjunction with tracking devices to enhance the safety of your vehicle. You will also be alerted when there is a chance to alter or steal.
The Autowatch Ghost is a TASSA-certified device that is insurance approved and offers superior protection against key hacking cloning, and even stealing. It utilizes a mobile app to control the device and is encrypted to protect. It also comes with an emergency PIN code override. It's a discrete effective and economical method to safeguard your vehicle from theft.
Ghost isn't without its problems. One of the most frequent issues is that users struggle to find the correct disarm sequence. The device requires input from buttons already in your vehicle, like those found on the steering column or console. Some people may find it difficult to remember or make a mistake especially when the device is being used for the first time. It is best to read the user manual that comes with the device, and practice the disarming procedure before driving.
Another issue is that some vehicles have problems with the CAN data connection, which can impact the functioning of the Ghost. This can be caused due to malfunctioning sensors or an abrasive OBD connector. It is recommended to have the system tested again before using it in case there are any issues with the CAN connection.
Change your PIN code quickly
The ghost is an excellent device that has taken the market by storm but the process of changing pin codes can be a little confusing. The device is programmed by the installer at the time of installation, but users may wish to alter it for various reasons. For instance they may want an alternative button that disables the device or not want their installer to be aware. ghost immobiliser and tracker is also possible that they dislike the pin code they have. It's simple to change your pin number. Follow these easy steps to find out how.
Please note: You must turn on the ignition in your vehicle but do not start the engine! This process only takes a few moments. The vehicle will then resume normal operation.