Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discrete, doesn't employ key fobs or LED indicators and is hidden within the wiring of the vehicle.
It also allows users to turn off the system temporarily by using Transport Mode in the event of renting out their vehicle. This guide will walk you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is directly connected to your vehicle's ECU and is protected by a unique pin code that you choose. It's undetectable to thieves using scanners for diagnostics or other modern methods, and is not able to be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a clean connection with the ECU of your vehicle. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the security package for your vehicle.
To prevent an accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once this is done the installer is now able to begin work. Hand tools are the most basic to be used for precise connections. A multimeter is a great tool to check electrical values. Insulation tape and cable ties are also essential for protecting connections and keeping wiring tidy. The Ghost Immobiliser user manual will provide specific instructions specific to your particular model.
It is important to choose an area for grounding that is free of any paint or debris during installation. The installer must ensure that the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. These wires can be plugged in or soldered depending on the model. Using a high-quality connector is recommended to ensure a long-lasting and secure connection.
After the installation is completed, the customer can activate Transport Mode. This allows mechanics or valet parking to access the vehicle without having to know the pin code. To do this, the user must hit the button for service on the dashboard 5 times within 2 seconds. Once this is done the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's an excellent option for anyone who regularly rents out their cars through platforms such as Turo. Immobilisers can lower the cost of insurance, as it lowers the chance of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. It will stop your car from being started even the theft or copies the key. This is due to its high-tech technology that is designed to prevent the engine from running until the correct PIN code is entered.
The device connects to the vehicle's bus network, CAN, allowing direct communication with the ECU. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence only you can identify which makes it impossible for anyone else to start your car. This is the best security system to protect your pride and joy, keeping its value intact in the event that you decide to sell it in the future.
Installing a ghost ignition is an easy process, however, it's important to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you must locate a 12V power supply and a solid grounding on the chassis of your car. After that, you are able to begin connecting the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a solid connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to avoid electrical short circuits.
Once the wires have been connected, you are able to connect the battery and start the engine to test whether the immobiliser works. If everything is functioning properly you can place it in a secure place under the dash or somewhere else in the vehicle. Make sure to cover it securely so that thieves can't alter it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it meets the highest standards of security and is a fantastic deterrent to car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without a code. It is simple to use, and can be set up to the service valet setting to ensure that your vehicle will not be activated if you take it for an MOT or service.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings, unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. The system does not send or receive radio frequency signals and instead uses CAN data to communication with your ECU. In addition, it doesn't need any modification to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. Once you've verified this, you're able to start your vehicle and leave with peace of mind.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while also protecting its value. If you ever need to surrender your car for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to locate the source of power that is constant (12V) and a grounding point. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This will reduce the risk of theft by thieves. To avoid mistakes, make sure to double-check these points and mark them using a label or tape. It's important to inspect every connection for signs of wear and tear. Make sure all connections are securely in place and properly insulated. Don't forget to test the Ghost Immobiliser after the installation is complete. This will make sure that the unit is operating correctly and that all connections are safe and well-insulated. If there are any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle's ECU to stop the motor from starting without authorization. Its cutting-edge technology protects your vehicle from hacking and key cloning as well as other common methods used by thieves to steal vehicles. The Ghost works in conjunction with existing tracking and alarm systems to offer the ultimate protection for your vehicle. The Ghost's unique features and discreet design make it a preferred option for car enthusiasts and security-conscious drivers alike.
To ensure proper integration of the Ghost Immobiliser, you must to follow all steps of the installation process. Consult the wiring diagram for the vehicle to aid you in locating and connecting the wires. Then, you'll need to identify the power source as well as grounding points. Once these are found then you'll need to mark them so that they're easily identifiable during the installation process. In addition, it is essential to use high-quality tools and materials. Basic hand tools can help you make precise connections. A multimeter will check electrical values, and ensure security. Insulation tape and cable tie will ensure that all connections are tidy. A Ghost-specific user's guide is also available.
Before proceeding with the installation it is important to test the system by entering the PIN code and starting the vehicle. This step will confirm that the immobiliser works according to plan, and prevents unauthorised vehicle starts. This step should be done regularly as part of your routine inspections of your vehicle to ensure the system is always working correctly.
After the installation is completed, you can start driving your vehicle with confidence. The Ghost will help keep your car and its contents secure from thieves who might steal it, ensuring that nobody can escape with your car without the proper PIN code. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts at theft or tampering. ghost car immobiliser will allow you to track your car in the event that it's stolen.
The Ghost can be used on a wide range of vehicles and is compatible with the majority of major manufacturers. If you are looking to secure your vehicle with this innovative device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA Registered installer which guarantees that we follow strict standards and procedures for installing our products. This assures insurance companies, customers, and law enforcement that installations are done in a safe and correct manner.