Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser that guards against key-cloning and hacking and vehicle theft. It also helps reduce your insurance costs and may even qualify you for incentives.
The Ghost immobiliser, which is discreet and simple to use, is integrated into the ECU of the vehicle. This makes it impossible to start the engine without a secret PIN code.
TASSA Approved
Autowatch Ghost is the best way to stop your vehicle being taken away by key copying. It has been approved by TASSA. This is the latest in car security technology and thwarts thieves in two ways. It can stop your car from starting if your keys are cloned and also stops you driving away if thieves have stolen your existing key fobs.
This next-generation device connects to your vehicle's CAN data network. A personalized PIN code is entered using the vehicles standard buttons on the dashboard or the steering wheel. The Ghost then prevents the engine beginning and can be programmed to a variety of different settings like Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and does not make use of radio frequency signals, which means that it cannot be detected by RF scanners or a code grabber.
The Ghost is a weatherproof tiny device that is sealed so that it can be hidden in the vehicle or installed on the dashboard where it is nearly impossible for a burglar to find. Contrary to other alarms and immobiliser systems on the market, this isn't an Thatcham Category approved product but is recognized by insurance companies as an effective anti-theft device. It comes with a 5-year warranty.
The TASSA verification process assures that any installation work performed on the Ghost will be carried out by a qualified and experienced installer. This gives the client, insurers and police confidence in the integrity of any installations undertaken. This will also ensure that the installers adhere to the directions of the product manufacturer and properly install the product. Installers who are TASSA members are committed to excellence, and they want to make a difference in the fight against criminality.
Compatible with a variety of vehicles
The Autowatch Ghost 2 immobiliser is an innovative device that shields your vehicle from key copying. Its PIN code system is integrated into the ECU of your car making it harder for thieves to copy keys or hack into the vehicle's system. It is also discrete and is able to be easily installed in many vehicles such as minivans and sports automobiles. It's also weatherproof and small enough to hide away from view. This makes it harder for thieves to steal it.
The process of installing the Ghost is simple and requires no supplementary wiring. It is compatible with numerous vehicles and communicates using the vehicle's data network, CAN. ghost immobiliser can also be deactivated or shut off by navigating to the main screen of the vehicle. It is also compatible with a variety of mobile apps, making it easy for you to manage your vehicle's security remotely.
The Ghost may have some issues after installation, despite its many benefits. These problems could be caused by a variety of factors, including faulty wiring or a mobile app that isn't compatible. In these instances the best option is to contact a professional installer to resolve the issue.
Another issue that users face is difficulty entering the Ghost's disarm sequence. This is usually due to users not practicing or forgetting the correct sequence. The manual for the device has an emergency code which can be used in case of issues occur.
The shrewd
Autowatch Ghost is a discreet and sophisticated security system that safeguards your vehicle against theft. The device utilizes the CAN data network of your vehicle to work and is completely inaccessible to thieves, which makes it an extremely effective deterrent. It can also be triggered by security systems such as car alarms, and it sends real-time notifications to the owner. These features can assist the police in finding your vehicle in the event that it is stolen.
This system is compatible with the majority of automobiles and can be fitted within less than an hour. It's a TASSA-approved aftermarket product that's compatible with vehicle trackers, and is even recognised by some insurance companies. It's also tamperproof and quiet, so criminals will be unable to hear the operation. The Ghost immobiliser is also programmable to require a PIN of up to twenty numbers. This makes it almost impossible to determine the PIN.
Another benefit of the Ghost is that it is only activated when the vehicle is in Service/Valet mode. This will prevent you from giving your PIN code to someone who needs access to the computer system of your vehicle, like mechanics. The Ghost also comes with a 5-year warranty.
The Autowatch Ghost is a revolutionary immobiliser that can stop key cloning as well as ECU hacking and car theft. It's an aftermarket CAN bus device that is a great choice for both new and older vehicles. It is easy to install and works quietly. This makes it possible to be installed in any car without cutting wires. It also allows you to change your pin number quickly so that only you know it. It also doesn't employ codes-grabbing or RF scanning technology which means it's nearly inaccessible.
Simple to use
Autowatch Ghost is an innovative and effective security system designed to thwart vehicle theft by shutting off the engine. It uses a personalised code created by the vehicle owner, that must be entered before the car can begin. This cutting-edge technology enhances the overall safety measures of your vehicle, making it a top choice for many drivers. The process of installing it isn't without its challenges. It requires careful planning and a keen eye for the details. This includes ensuring compatibility and using a professional's knowledge, adhering legal regulations, and understanding the Ghost II's operational complexities. Prioritising these aspects ensures an efficient installation and optimal functionality.
In contrast to conventional systems The Ghost II is silent and can't be spotted by thieves. It is also small and weatherproof, making it difficult to gain access. It is compatible with CAN, Lenastark and other vehicles. It is also able to be utilized in vehicles that require isolation of the battery for maintenance. The Ghost 2 also has a Transport Mode, which disables the device when your vehicle is being rented or loaned out.
To use the Ghost 2, you must have a personal PIN, which must be entered before starting the vehicle. The installer will assign the default PIN for you, but to ensure your security, it is best to change it as quickly as you can. The device is able to enter sleep mode to conserve the battery, but should it detect an engine management system, it will wake up and stop the vehicle from getting started. This feature is able to be disabled by going to the Settings menu. It is recommended to use the Ghost immobiliser when your vehicle is driven, and to always lock it before leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security device that prevents car theft by shutting down the engine of the vehicle. It works with a code that is unique to the owner of the vehicle, making it a formidable deterrent. However, installing this device requires meticulous preparation and attention to the smallest of details. By ensuring compatibility, relying upon professional expertise in compliance with legal regulations and fully understanding the system's functions it is possible to ensure a smooth installation and get the most benefit from this security system.
This innovative CANbus immobiliser from Autowatch is simple to install, and works silently so criminals cannot hear it working. It utilizes CAN bus communication to communicate with the vehicle. Compatible with a wide variety of vehicles. It is a breakthrough in vehicle safety. It also protects your car from key cloning, hacking and theft of your car, since it won't start unless you have the correct pin code. It is small and weatherproof, making it difficult for criminals to change or spot.
You'll need to locate the CAN High (CAN H) and the CAN Low (CAN L) Wires on your vehicle's wiring schematic before you begin installing the Ghost Immobiliser. Then connect the high wire of the CAN to the low and the CAN low to the ECU. The wires are located under the dashboard or close to the engine.
It is recommended to employ an installer who is reputable and certified for the installation of the Ghost immobiliser. You can rest assured that the system is installed correctly and won't hinder your vehicle's operation. In addition, the installer will be able to guide you on how to use the new device efficiently.